Nistune Forums

I tried things with using the romulator instead of the nvram. With the romulator the updates happen much much faster. It also seems that selecting things is a bit easier. Maybe I'm just imagining things. More testing to come. On a side note, it seems that it's very easy to accidentally load a rom th...

Matt, We're looking into what's involved in tuning the various sr20 ecus that are out there. Are all the sr20 ecus a simple rom chip replacement or are they more complicated like the ka24de that requires the biki type daughter board? What are the current options as far as using the romulator/nvram w...

I finally had a chance to play with Nistune on the dyno. Here are some comments. - So far the nvram seems to work fine. Didnt notice any real problems but I also need double check the bin file to make sure its still correct. One thing I did notice is that when I make some timing changes under steady...

Russ, To do debug logs go into the configuration section of nistune and click Debug Logging. The logs are saved in the programfiles/nistune/ directory named as the date and time the log was created. Don't forget to zip them if they are large and you want to post them here. You're using the 88ss file...

Ok. Pin 1 on the nvram buzzes to pin 28 of the ecu with the nistune board in place. I also measure ~10k between nvram pin 27 and 28 because of the resistor you had us put in. Should I put in a resistor to pin 20 as you mentioned?

Did some quick testing with the wideband. Wideband operation seems to be working well. I changed teh aux2 csv file to work with the pressure sensor I have hooked up so it would display a boost pressure. Seems to be working as it should. I would suggest changing the default aux csv files so they read...

Wideband display seems to be good so far. I've only had time to do one log which I will post later. I'm still having some interesting issues with the chip and checksum stuff. More info to come.

Matt wrote: can you please check pin 1 of the NVRAM is indeed buzzing out to VCC.

Which pin is Vcc? It buzzes to pin 27 on the ecu side.

Just installed logworks2 on a fresh machine. The mts.dll file was only copied to the programfiles/logworks2/ folder.

ill install the innovate stuff on a virgin machine and see where the mts file goes.

Ah, cool. Got it working. My mts.dll file was stored in programfiles/logworks2/. I copied it to the system32 folder and the install worked perfectly. I'm running XP SP2.

Zip the log. It's stupid how much it compresses it.

I installed 907 and got some errors that i think are related to the innovate stuff. Innovate option is not in the config page. Consult wont connect either but i need to double check some things.

I'll try to do some more playing around and see if I can replicate the problem.

Not sure what exactly is happening here. I got home yesterday and the car was idling lean and acting strange when I let it sit at idle(maybe a seperate issue). Nistune seemed to be working fine. I played with the tp min for a while, played with the wideband inputs, and then shut it down. Started it ...