Search found 233 matches

by Bernardd
Tue May 29, 2012 3:12 am
Forum: Type 3/4/5
Topic: made 632 whp but leaning out
Replies: 14
Views: 6685

Re: made 632 whp but leaning out

Your max tp appears to 41 during that pull while your map is setup for over double that. The pw commanded is fairly close to the actual pw so that's good but you're only using over half of the available duty cycle. Lots of room to richen up the mixture. You also have the timing map set with feedback...
by Bernardd
Thu Apr 26, 2012 12:27 am
Forum: General Nistune Discussion
Topic: VE table and open / closed loop threshold on 70F05 95 S14
Replies: 14
Views: 9436

Re: VE table and open / closed loop threshold on 70F05 95 S14

Are you guys unplugging the o2 from the harness as well or just removing it via nistune?
by Bernardd
Tue Apr 24, 2012 11:50 pm
Forum: General Nistune Discussion
Topic: who has the highest horsepower nissan on nistune?
Replies: 15
Views: 8969

Re: who has the highest horsepower nissan on nistune?

I'm at 425whp with my L28ET. I've also tuned L28's into the 500's with nistune. I think 6 cylinders can count if they only have two valves per cylinder. 8)
by Bernardd
Fri Apr 13, 2012 12:11 am
Forum: B.S.
Topic: Australian Users
Replies: 3
Views: 4298

Re: Australian Users

Yes I did. I made the flat bar on the trans the same lenght as the throw of the shifter. I went back to a stock shifter. The ratchet shifter sits too high on the console and since the trans was already installed, I'd have to cut the console or remove the trans again to make it fit the way I wanted i...
by Bernardd
Sat Oct 22, 2011 3:32 pm
Forum: Type 2
Topic: RB25: converting from high impedence to low....Do I.....
Replies: 11
Views: 3387

Re: RB25: converting from high impedence to low....Do I.....

skyline_stu wrote:
Or I'll go past you both with my old school L28, non crossflow 713hp monsters.. :D
Using a VL ECU of course....
Pardon? :shock:
by Bernardd
Mon Sep 26, 2011 3:50 am
Forum: B.S.
Topic: Australian Users
Replies: 3
Views: 4298

Australian Users

Anyone know someone with a jatco and pro ratchet installed? I've picked one up for my 3n71b and need the length of the lever used at the transmission. Or a good way of calculating it based on the stock lever length.
by Bernardd
Mon Sep 05, 2011 11:13 am
Forum: General Nistune Discussion
Topic: z32 Running Rb25 (Problem Controlling larger Injectors)
Replies: 5
Views: 2653

Re: z32 Running Rb25 (Problem Controlling larger Injectors)

Have you tried again with new spark plugs?
by Bernardd
Wed May 25, 2011 1:13 pm
Forum: Type 1
Topic: drag race tune help please!
Replies: 3
Views: 1901

Re: drag race tune help please!

It looks like you have the stock vq map with cobra maf.
by Bernardd
Wed Mar 30, 2011 12:31 pm
Forum: General Nistune Discussion
Topic: not sure if its a ecu problem but maybe someone can help
Replies: 11
Views: 4173

Re: not sure if its a ecu problem but maybe someone can help

adjust first time injection by the same amount you adjusted the k value for the new injectors. that should give you stock like starting.
by Bernardd
Tue Mar 22, 2011 2:35 am
Forum: General Nistune Discussion
Topic: Interesting question
Replies: 4
Views: 2570

Re: Interesting question

If you have the 12 feed figured out the rest is easy. Connect the positive of the volt meter to one of the cas outputs in question and the other end of the meter to ground. With the 12vdc connected slowly rotate the cas, you'll see the voltage go up to 5vdc everytime a window or slit in the cas open...
by Bernardd
Sun Mar 20, 2011 10:08 am
Forum: Test Results
Topic: L28et bin
Replies: 12
Views: 9101

Re: L28et bin

At this point is there any way you can help me create a bin based with the info i have provided that I may be able to correct the current issues and just have to fine tune ? I will be more than happy to compensate for your time and such. thanks . Start with the jwt binfile, go to the operations dro...
by Bernardd
Sun Mar 20, 2011 2:38 am
Forum: Test Results
Topic: L28et bin
Replies: 12
Views: 9101

Re: L28et bin

Can you explain why the maf table change? What drove you to make those changes? Does jwt delete the tps? It looks like you might want to restart with the jwt binfile and rescale for your new injectors. You raised your k value but lowered your scales, this is the reverse of what you should do. The ma...
by Bernardd
Fri Mar 18, 2011 10:36 am
Forum: Type 2
Topic: After start timing Advance BDTC?
Replies: 10
Views: 3199

Re: After start timing Advance BDTC?

The idle/decel table is the main idle timing map.
by Bernardd
Thu Mar 17, 2011 11:43 pm
Forum: Type 2
Topic: After start timing Advance BDTC?
Replies: 10
Views: 3199

Re: After start timing Advance BDTC?

I was talking about the advance table. I have the subtract table zero'd out.