Nistune Forums

Good morning, I am finishing up my KA-T project and have a question about setting nistune. Quick overivew of the car: - T28 Turbo - Stock KA24DE MAFS - Subaru STI 550cc Injectors - Looking to get 200HP I have not used Nistune before the Feature Pack and now the whole K-constant and Total Injection M...

Newest release of Nistune works like a charm. Here is the test code I used with python and a program called com0com (com port emulator). Matt, can we have the option of what devices we want displayed? I added the attachment of the available iMDF devices from PLX in an attachment in my first few post...

Thank you for the response Matt. Do you think it could be related to windows 10? I can install windows 7 on a separate partition on the same hardware and retry the latest nistune. Is it possible to make the com protocol user configurable? Terminate timeout, error masks, flush yes/no? Always ready to...

14:40:59.933 ReadLoop: RemainingWaitBytes 0 WaitBytes 6, Available 6 14:40:59.933 getArray RX bytes: 31 38 2E 34 0D 0A [] 14:40:59.933 BufferRX: 18.4 14:40:59.933 Converted AFR: 18.400000 14:40:59.933 PollRead() 14:40:59.933 ReadLoop(): ThreadSleepTime: 30 14:40:59.965 HandleNoData(): Counter: 1 14...

To isolate the issue to Nistune, last night I set up 2 virtual comports connected to each other, Virtual COM4 and COM5. I used python and serial libraries to drive an input stream into COM5, which in return came out of COM4. This allowed me to play around with the packet sizing, packet rate, and pac...

I got a response from PLX Devices with an updated table of all possible devices in the iMFD protocol; it is attached below. Decoding the Packet from a Gen4 PLX device: |0x80| |0x00 00 00| |0x01 37| |0x00 12 00| |0x09 25| |0x00 19 00| |0x01 25| |0x00 1A 00| |0x0F 28| |0x40| {0x80}(Start Bit) {0x00 00...

I hope this is the correct section to post this up. Software : Im running latest Nistune SW with FP and ROM Pack installed. Hardware : PLX Devices SM-AFR Gen 4 Module Only (No other device in the chain) USB Interface : CP2102 Micro USB To TTL/Serial Module UART (I've used these in the lab at work mu...

Thank you very much for the help.

Is there any value in noting that at my Load Index does not go below 12 during idle, so essentially the left side of my Fuel and Ignition timing maps is never accessed?

Hey All, I would like to use Nistune as a diagnostics tool as well as a tuning tool to find out if the engine is running correctly. Here is where I need your help with my car. Engine : S13 KA24DE Auto to 5 speed swapped Timing : 20Degrees (set using "Active Tests" in Nistune and using a ti...