Search found 73 matches
- Wed Feb 25, 2009 7:11 am
- Forum: Type 1
- Topic: rb30 na - throttle oxygen and speed sensor
- Replies: 13
- Views: 5637
- Tue Feb 24, 2009 9:40 pm
- Forum: Type 1
- Topic: rb30 na - throttle oxygen and speed sensor
- Replies: 13
- Views: 5637
rb30 na - throttle oxygen and speed sensor
ok, just got my oxy sensor working (appears you need 12v supplied to it, doh) im getting a reading of around 1.2 at idle. what should i be aiming for? 1.0? does higher = richer? does the throttle switch only control the fuel cut? i cant see any where else it is used in the tables. I also read in ano...
- Fri Feb 20, 2009 9:59 pm
- Forum: Type 1
- Topic: injector duty not moving from zero
- Replies: 3
- Views: 1819
- Fri Feb 20, 2009 12:59 pm
- Forum: Type 1
- Topic: injector duty not moving from zero
- Replies: 3
- Views: 1819
injector duty not moving from zero
just had a play out on the street with nistune. as its not realtime yet due to possible noise issues from the cdi, i had to press F4 as i was accelerating to catch a powe run. at idle and at 3k rpm, the injector duty is at zero. also the o2 is at zero but that could easily be a faulty sensor. so why...
- Sun Feb 15, 2009 9:01 am
- Forum: Hardware Bugs
- Topic: consult keeps disconnecting....
- Replies: 18
- Views: 20802
now i dont have a stereo in the car for reasons that with the cdi and non r type sparkplugs i knew i would always have a problem with noise. surely there have been other track cars that have experienced the same noise issues? if i had a serial connection instead of usb would i still have issues? wha...
- Fri Feb 13, 2009 5:23 pm
- Forum: Hardware Bugs
- Topic: consult keeps disconnecting....
- Replies: 18
- Views: 20802
- Fri Feb 13, 2009 5:00 pm
- Forum: Hardware Bugs
- Topic: consult keeps disconnecting....
- Replies: 18
- Views: 20802
i just connected for the first time!! I was able to sync from the ecu ok. when running the engine at idle, just looking around to get an idea of whats going on, it just kept dropping out after only a few seconds. i will try a booster cable straight to the ecu case, and try shorting the usb case to t...
- Wed Feb 11, 2009 3:44 pm
- Forum: Type 1
- Topic: 'big cam' idle - is it latency
- Replies: 7
- Views: 3407
sorry, you mis understood, my mistake. apparently guys with ls1 edit are able to program a rough idle so it appears the car has a large cam. this is what i meant by dialing in a cam (with the keyboard) knowing exactly what is required to dial in a cam shaft. so, do they just adjust latency to achiev...
- Tue Feb 10, 2009 5:57 pm
- Forum: Type 1
- Topic: 'big cam' idle - is it latency
- Replies: 7
- Views: 3407
- Mon Feb 02, 2009 11:00 am
- Forum: Type 1
- Topic: 'big cam' idle - is it latency
- Replies: 7
- Views: 3407
- Sun Feb 01, 2009 6:29 pm
- Forum: Type 1
- Topic: 'big cam' idle - is it latency
- Replies: 7
- Views: 3407
- Thu Jan 29, 2009 11:09 pm
- Forum: Type 1
- Topic: 'big cam' idle - is it latency
- Replies: 7
- Views: 3407
'big cam' idle - is it latency
after a switch to nistune ecu set for my new injector size, the engine idles great from cold but once it warms up it develops a 'large cam' it still drives fine, just a crazy idle, which kind of sounds cool. so should i start by increasing the latency i have read a few posts about latency but didnt ...
- Mon Jul 07, 2008 2:26 pm
- Forum: Software Enhancements
- Topic: Consult gauges
- Replies: 4
- Views: 2626