Search found 45 matches

by IceManPL
Thu Jul 16, 2015 7:39 am
Forum: Type 2
Topic: Problem with connection - RB25DET with z32 ecu + nistune
Replies: 1
Views: 1255

Problem with connection - RB25DET with z32 ecu + nistune

rb25det S2
z32 ecu 40P01 + nistune type 2

ECU is modified for nistune, type board fitted, car starts, consult plugged, but can't connect.
In nistune under "select car" i selected z32 type2.

Should i do anything more to connect ?
by IceManPL
Wed May 13, 2015 4:52 am
Forum: Type 1
Topic: ECU retards ignition without knock
Replies: 2
Views: 1730

Re: ECU retards ignition without knock

Heh, didn't have a chance, engine blown :roll:
Propably one of valves broke down.
by IceManPL
Fri May 08, 2015 6:24 am
Forum: Type 1
Topic: ECU retards ignition without knock
Replies: 2
Views: 1730

ECU retards ignition without knock

Hi
Strange thing ...
At WOT , ECU retards ignition until 4k RPM, and then at EXACTLY 4k RPM it adds 4-5 deg.
After that timing is almost value from the map, but i think still 1 deg retarded on 3-4 gear.
I removed knock sensing from the map.

Map and log attached.
by IceManPL
Sun Apr 05, 2015 6:56 am
Forum: Type 1
Topic: CA18DET - Base setup help
Replies: 56
Views: 27591

Re: CA18DET - Base setup help

i don't understand your problem
your AFR are ok
real AFR will never match this from map
you can put 10 in map and have 12 real AFR, this is normal
by IceManPL
Mon Mar 16, 2015 2:49 am
Forum: Type 2
Topic: Nistune for R33 - is this z32 ecu will work ?
Replies: 11
Views: 3512

Re: Nistune for R33 - is this z32 ecu will work ?

so this is n15 ecu ? on ebay seller says this is 300zx :shock:
by IceManPL
Sat Mar 14, 2015 6:08 am
Forum: Type 2
Topic: Nistune for R33 - is this z32 ecu will work ?
Replies: 11
Views: 3512

Re: Nistune for R33 - is this z32 ecu will work ?

And another ECU to check ;)
Strange part number:
23710-IN411
A18-E86 A25
by IceManPL
Wed Aug 06, 2014 6:57 am
Forum: Software Bugs
Topic: Feature Pack V1.0 - can't download/upload maps ecu<>nistune
Replies: 4
Views: 2317

Feature Pack V1.0 - can't download/upload maps ecu<>nistune

After connecting i try download map from ecu to nistune. First nistune ask me if i wish to change adress file - answer is no, because i want to use featurepack adress file. Then download process starts and ... error. Checked on 2 cars, 2 versions of nistune 1.2.11, 1.2.12. Am i doing something wrong ?
by IceManPL
Sat Jul 26, 2014 7:32 am
Forum: B.S.
Topic: Anyone here have experience with Apexi PowerFc and rb25det ?
Replies: 2
Views: 3404

Anyone here have experience with Apexi PowerFc and rb25det ?

Anyone here have experience with Apexi PowerFc and rb25det ? Can't find "official" forum/support for Apexi :( Maybe someone here can help me ? Have problem with idle. With stock ecu car idles fine, TPS reporting about 370mV at idle, rpm about 650-700. With PowerFC car don't want to idle an...
by IceManPL
Mon Jun 23, 2014 5:30 am
Forum: Type 1
Topic: Ca18det + Holset Hx35 + E85 tune
Replies: 29
Views: 12462

Re: Ca18det + Holset Hx35 + E85 tune

I have a question : When I'm at very low load (under 0 bar) at 4000rpm I have fuel cut I think... I had enrich the map a lot in this part of the map but I have always the same problem... The problem doesn't come at higher load. My friend's s13 got this issue too. It leans out a little, exactly at 4...
by IceManPL
Tue May 20, 2014 7:36 pm
Forum: Type 2
Topic: Nistune for R33 - is this z32 ecu will work ?
Replies: 11
Views: 3512

Re: Nistune for R33 - is this z32 ecu will work ?

What about modified ecu ?
23710-41P14 modified by Blitz
Will this work ?
by IceManPL
Tue Apr 08, 2014 7:45 am
Forum: Type 3/4/5
Topic: NISTUNE disconnects on 1.2bar , 1bar is fine ... wth ?
Replies: 1
Views: 1396

NISTUNE disconnects on 1.2bar , 1bar is fine ... wth ?

Hi Car: s14a. Mods: Stock engine, gt2871, 300zx maf, 550cc injectors from subaru, 3" exhaust Everything was fine at 0.5, 0.8, 1 bar (rare random disconnects, but not bad) and then at 1.2 bar nistune keeps disconnecting at 4000-4500 rpm. Switching to stream mode give me a little more rpms, and d...
by IceManPL
Sun Mar 30, 2014 6:29 pm
Forum: Type 2
Topic: Nistune for R33 - is this z32 ecu will work ?
Replies: 11
Views: 3512

Nistune for R33 - is this z32 ecu will work ?

Hi

My stock r33 ecu number is 23710-13u00 mec-r720.

I found a cheap z32 ecu: 23710-53p00

Will it work ?
by IceManPL
Thu Oct 17, 2013 4:59 am
Forum: Type 2
Topic: Looking for ignition map for rb25det about 1 bar of boost
Replies: 3
Views: 1777

Looking for ignition map for rb25det about 1 bar of boost

Just basic ign map for 1 bar to have a start point, because never done rb25, only ca18det and sr20det.
Any advice on anything specific for rb25 ? :)
Thx