Search found 256 matches
- Fri Sep 25, 2015 12:43 am
- Forum: Type 3/4/5
- Topic: AFR very sensitive to electric load
- Replies: 12
- Views: 8305
Re: AFR very sensitive to electric load
Hi Matt, Bingo .... You are totally correct, the signal ground is short with chassis ground. I have measure the resistant of the sensor ground to the chassis ground, found out it is 0 resistant. but guess what, it is the 12V ground of the Z32 AFM was connected to signal ground (NOT done by me), so I...
- Thu Sep 24, 2015 3:43 pm
- Forum: Type 3/4/5
- Topic: Tuned my S14, Ignition map?!
- Replies: 7
- Views: 3313
Re: Tuned my S14, Ignition map?!
As I see, you have the timing transistion between TP63 to TP70 is a deep slope, timing map is not smooth. And the timing under 4,000 rpm , on vacuum stage, it seems too much timing, What AFM ? different AFM will have different result on map walking. On which TP at mid rev range, your engine seeing 0...
- Wed Sep 23, 2015 1:23 am
- Forum: Type 3/4/5
- Topic: AFR very sensitive to electric load
- Replies: 12
- Views: 8305
Re: AFR very sensitive to electric load
This video is intent to taken for my customer, thats why I speak our own langauge. The fuse I remove is No.34 fuse in FSM, after checking FSM, it is the power supply for MAIN, MAF, CAS, IGN/SG, That is power supply for ECCS Relay, MAF, CAS, If I remove the fuse, the engine should be die at once, but...
- Wed Sep 23, 2015 12:42 am
- Forum: Type 3/4/5
- Topic: AFR very sensitive to electric load
- Replies: 12
- Views: 8305
Re: AFR very sensitive to electric load
Download the CSV and open it, you will see how far the AFR jump.
Earth point check twice with no resistant to battery ground (good connection), but found an interesting error on power supply, I think this cause the ECU to act strange behaviour. uploading video to youtube.
Earth point check twice with no resistant to battery ground (good connection), but found an interesting error on power supply, I think this cause the ECU to act strange behaviour. uploading video to youtube.
- Tue Sep 22, 2015 5:28 pm
- Forum: Type 3/4/5
- Topic: AFR very sensitive to electric load
- Replies: 12
- Views: 8305
AFR very sensitive to electric load
S14 SR20DET with type 3 board on 74F00 ecu , non FP version, AFR very sensitive to electric load (voltage does not change much) , in this log, I only turn on front light, and then A/C, the AFR will jump from 16 to 11, any hints to fix this ? This car had done tuning when the battery located at the t...
- Sun Sep 20, 2015 2:05 pm
- Forum: General Nistune Discussion
- Topic: GTR35 slot type AFM in 3" tube on CA18, showing 4.88 V .....
- Replies: 2
- Views: 1672
- Sun Sep 20, 2015 1:41 pm
- Forum: Innovate
- Topic: Innovate SCG-1 nistune connected but no AFR showing in AFR
- Replies: 11
- Views: 6479
Re: Innovate SCG-1 nistune connected but no AFR showing in A
I think so, when the older version Logworks first install, SCG-1 has not been launch on the market.
- Sat Sep 19, 2015 5:23 pm
- Forum: General Nistune Discussion
- Topic: GTR35 slot type AFM in 3" tube on CA18, showing 4.88 V .....
- Replies: 2
- Views: 1672
GTR35 slot type AFM in 3" tube on CA18, showing 4.88 V .....
Single GTR35 slot type AFM in 3" tube on CA18 suck thru set up, I've got 4.88 V at around 1.4 bar at 6,400 rpm only. All pipe , intercooler and BOV pressure test at 3 bar without any leaking. How much room to increase boost estimated ? Max reading 5.1V ? If 5.1V max out, I've only got 0.22 V ro...
- Sat Sep 19, 2015 5:05 pm
- Forum: Innovate
- Topic: Innovate SCG-1 nistune connected but no AFR showing in AFR
- Replies: 11
- Views: 6479
Re: Innovate SCG-1 nistune connected but no AFR showing in A
Problem solved, uninstall LogWorks and any related program, reinstall all latest version.
VB works and MTS can show up in Nistune.
Thanks Matt.
VB works and MTS can show up in Nistune.
Thanks Matt.
- Fri Sep 18, 2015 9:45 pm
- Forum: Innovate
- Topic: Innovate SCG-1 nistune connected but no AFR showing in AFR
- Replies: 11
- Views: 6479
Re: Innovate SCG-1 nistune connected but no AFR showing in A
Hi Matt, there is no data in VB, what can I do ?
- Fri Sep 18, 2015 9:45 pm
- Forum: Innovate
- Topic: Innovate SCG-1 nistune connected but no AFR showing in AFR
- Replies: 11
- Views: 6479
Re: Innovate SCG-1 nistune connected but no AFR showing in A
Screen Capture
- Fri Sep 18, 2015 9:44 pm
- Forum: Innovate
- Topic: Innovate SCG-1 nistune connected but no AFR showing in AFR
- Replies: 11
- Views: 6479
Re: Innovate SCG-1 nistune connected but no AFR showing in A
Screen Capture
- Tue Sep 15, 2015 6:39 pm
- Forum: Innovate
- Topic: Innovate SCG-1 nistune connected but no AFR showing in AFR
- Replies: 11
- Views: 6479
Re: Innovate SCG-1 nistune connected but no AFR showing in A
Here is the logs on the SCG-1
WB1 Connected, AFR window black screen, input tracer did not show any Innovate AFR for selection.
Same notebook, same DB9 to USB coversion cable, same version of nistune, it can connected to MTX-L on another S13 CA18DET 23710-36F00 Type 1 board ECU.
WB1 Connected, AFR window black screen, input tracer did not show any Innovate AFR for selection.
Same notebook, same DB9 to USB coversion cable, same version of nistune, it can connected to MTX-L on another S13 CA18DET 23710-36F00 Type 1 board ECU.
- Fri Sep 04, 2015 5:27 am
- Forum: Innovate
- Topic: Innovate SCG-1 nistune connected but no AFR showing in AFR
- Replies: 11
- Views: 6479
Re: Innovate SCG-1 nistune connected but no AFR showing in A
Tried Logworks snd its display correctly. But I've forgot the debug log, will do tomorrow.
- Mon Aug 17, 2015 3:02 pm
- Forum: Innovate
- Topic: Innovate SCG-1 nistune connected but no AFR showing in AFR
- Replies: 11
- Views: 6479
Innovate SCG-1 nistune connected but no AFR showing in AFR
SCG-1 can be connected to LM programmer, it also connected to nistune on WB1, but no AFR showing in the small window, just everything black out.
Could SCG-1 work with nistune ?
My MTX-L used to be work fine on eariler version of nistune, but does not work on lastest test release.
Could SCG-1 work with nistune ?
My MTX-L used to be work fine on eariler version of nistune, but does not work on lastest test release.