Search found 256 matches
- Fri Oct 04, 2019 9:41 pm
- Forum: Type 3/4/5
- Topic: S14a SR20DET bucking at cruisung
- Replies: 17
- Views: 8822
Re: S14a SR20DET bucking at cruisung
Coarse teeth tensioner outlooking.
- Fri Oct 04, 2019 9:33 pm
- Forum: Type 3/4/5
- Topic: S14a SR20DET bucking at cruisung
- Replies: 17
- Views: 8822
Re: S14a SR20DET bucking at cruisung
Today I swap out the original coarse teeth chain tensioner, replace it with a USED S15 fine teeth tensioner, it did make a different. The chain no longer hitting the chain guide on the first start up. The jerk only appear at 800 rpm off throttle, once the throttle crack open, between 800 rpm to 1,20...
- Thu Oct 03, 2019 3:36 am
- Forum: Type 3/4/5
- Topic: S14a SR20DET bucking at cruisung
- Replies: 17
- Views: 8822
Re: S14a SR20DET bucking at cruisung
Hi Pinto, Does your SR have aftermarket cams ? (not 100% cause by the cams, but symptom exaggerated after aftermarket cams installed). I own my SR for 2 years now, since I change to 256 cams, it start to jerk (feels like engine pushing and pulling, bouncing back and forth ) at very low rpm, it jerk ...
- Wed Jul 10, 2019 4:48 pm
- Forum: Type 1
- Topic: Ca18det map help
- Replies: 2
- Views: 1057
Re: Ca18det map help
what fuel are you running ? what brand injector are you running ? do you know the injector dead time ? low or high resistance ? If you are running pump fuel gasoline , thats too much timing advance for 1.3 bar. Refer to your main fuel map, it seems that your tuner was trying to reduce fueling on low...
- Sun Jun 16, 2019 10:13 pm
- Forum: Software Bugs
- Topic: Nistune hang up when trying to use Active Tests
- Replies: 1
- Views: 1985
Nistune hang up when trying to use Active Tests
Nistune hang up when trying to use Active Tests.
It hangs when click Start button.
It hangs when click Start button.
- Thu Apr 04, 2019 6:31 am
- Forum: AEM
- Topic: AEM Digital Wideband UEGO Gauge with DLP-IO8
- Replies: 17
- Views: 6060
Re: AEM Digital Wideband UEGO Gauge with DLP-IO8
Not the software freeze, only the wideband numbers freeze.Matt wrote:Okay please clarify, when you say freeze, does the software not respond, or is just the display not updating (freeze of numbers?)
- Sun Mar 31, 2019 7:11 pm
- Forum: AEM
- Topic: AEM Digital Wideband UEGO Gauge with DLP-IO8
- Replies: 17
- Views: 6060
Re: AEM Digital Wideband UEGO Gauge with DLP-IO8
First I've heard of this issue 1. Does this happen since a particular version? 2. Can you enable debug logging 3. Does it freeze up when running the car, or even at idle or with ignition key on only? What is the frequency of the freezeups (time between freeze?) I do not know, since this is the firs...
- Thu Mar 28, 2019 7:45 pm
- Forum: AEM
- Topic: AEM Digital Wideband UEGO Gauge with DLP-IO8
- Replies: 17
- Views: 6060
Re: AEM Digital Wideband UEGO Gauge with DLP-IO8
I did ground all unused channels . I found that the AEM UEGO serial output is not very reliable , the AFR display is correct but window always frozen , it frozen up per every few pull, need to click disconnect wideband botton few times to get it reconnect . On the other hand, the AEM wideband fail s...
- Wed Mar 27, 2019 4:50 pm
- Forum: Software Bugs
- Topic: V1.31 , TP Missing ?
- Replies: 2
- Views: 2366
Re: V1.31 , TP Missing ?
And this
- Wed Mar 27, 2019 4:30 pm
- Forum: Software Bugs
- Topic: V1.31 , TP Missing ?
- Replies: 2
- Views: 2366
V1.31 , TP Missing ?
It might not be 100% software bugs , but I have to tell the incident background. Come across a 1995 180SX black top SR20DET with 23710-50F05 factory ecu . Was trying to trouble shoot a Limp mode symtom (no DTC for the AFM), when let engine idle for a couples of minutes , it won't rev pass 2,000 rpm ...
- Wed Mar 13, 2019 2:52 am
- Forum: AEM
- Topic: Wideband AEM Failsafe 30-4900 connection
- Replies: 21
- Views: 17669
Re: Wideband AEM Failsafe 30-4900 connection
Thank you Me1nik, it works excellent.
- Wed Mar 13, 2019 2:19 am
- Forum: AEM
- Topic: AEM Digital Wideband UEGO Gauge with DLP-IO8
- Replies: 17
- Views: 6060
Re: AEM Digital Wideband UEGO Gauge with DLP-IO8
Yes , if using AEM UEGO default P00 or P01 Voltage/AFR output table. The table is from AEM installation instruction pdf. The DLP to nistune will slightly off. eg . AEM default 2.000V = AFR14 but I need to shift to next voltage 2.125V in order do display AFR14, still 0.1 point off the gauge. PS. I ha...
- Mon Mar 11, 2019 6:26 pm
- Forum: AEM
- Topic: AEM Digital Wideband UEGO Gauge with DLP-IO8
- Replies: 17
- Views: 6060
Re: AEM Digital Wideband UEGO Gauge with DLP-IO8
Set up complete, wideband settings seleceted "AEM UEGO Boost", AFR display ok !
- Mon Mar 11, 2019 6:16 pm
- Forum: AEM
- Topic: AEM Digital Wideband UEGO Gauge with DLP-IO8
- Replies: 17
- Views: 6060
Re: AEM Digital Wideband UEGO Gauge with DLP-IO8
The DLP setup is grounded to AEM power source ground, all channel in nistune is more stable, but the AFR still 0.5 point off, I can set up a CSV to match it. I also set up the aem serial output to my notebook, but I can't get it work. Is here any instruction how to configure nistune to accept the se...
- Sun Mar 10, 2019 2:33 am
- Forum: AEM
- Topic: AEM Digital Wideband UEGO Gauge with DLP-IO8
- Replies: 17
- Views: 6060
Re: AEM Digital Wideband UEGO Gauge with DLP-IO8
I have just read the NIStune Software Users Manual V2.0
I can use the serial output from the UEGO gauge and no look up files (CSV) need.
Will this serial output display real AFR in nistune ?
I can use the serial output from the UEGO gauge and no look up files (CSV) need.
Will this serial output display real AFR in nistune ?