Nistune Forums

I've seen this before on guages. The USB consult table downloaded okay but now during operation the data is getting corrupt. If you get a debug log then I can confirm if it is a problem similar to what I have been working this week with the KA24E ECU which has hardware differences If you can take a ...

response from PL [quote]They don’t go into limp mode without a good reason. When they do it’s normal for Consult to die – I think that’s pretty standard across all ECU’s that have a limp mode. Usually they will only go into limp if something drastic has happened – ie: code has crashed du...

Thats what I have two very old AMDK6 machines here for... to drive parallel EPROM programmer, NIStune programmer and parallel JTAG programmer

Just about all new laptops dont come with these so I have to reprogram everything remotely via network connections

Thats fair enough that you are frustrated. Sounds like a few problems. What is the ECU ID / Revision that is displayed on the screen when you get connection? For starters the burn should never fail, and the problems you are having with the ECU shouldn't happen either Lower temperature can change the...

This is a concern. How often is this occuring? What is the ECUID shown in NIStune and what is the ID on the case of your ECU?

Where are you reading 'code 0' from?

The first thing is to do the injector resize from NIStune if you haven't done that yet (there is a menu option and procedure is covered in the software users manual)

Thanks for letting me know. From the screenshot, the split log is using a different reference point (the red line that you see) for the consult values displayed The reference point should be the same as the consult log view window, and adjusted when it is clicked Having the windows now a different w...

Can you guys post a standard logger file (not debug log) with the temperature included from start of run (cold) to warm

I would like to compare this against coolant temperature

I have recompiled an older version of the Willem source with Borland C++ so I should be able to modify the address range in that

You would have to ask bryant... he setup this forum so knows how to configure it

Software users manual updated for wideband... Also software itself now has the warning window 0.91124 now released 10463 Add AFR to lambda based on 14.7 translation to wideband panel 10464 Fix zeitronix output for RPM, boost, TPS, User. 10466 Update wideband directories in install package and docume...

Okay the problem is that the wrong wideband files are being loaded for your TechEdge. Serial reading for AFR is fine... although there are gaps between data. I can tell from the min/max values below: Kens log: 19:45:25.046 Entry 0: Min=800, Max=3200 19:45:25.046 Successfully loaded afr1.csv What it ...

Just a note there was a problem with the older version displaying AFRs for this unit

Code is updated now (latest is 0.91123 as this time) which has the AFR display fix

I can make them sticky so they stay at the top. Let me know which ones

Send me a ROM image through. Those ROMs ... one of them I extracted myself from a J30 posted to me and the other was emailed through

These are Type 1 so no imbuilt consult so you will need to pull the chip and read it in an EPROM programmer

We can compare the VQ maps then