Awesome news Matt, you're the best!
I can't believe someone hasn't raised this issue before.
so what beta version should I be waiting for?
Search found 175 matches
- Wed Jun 20, 2012 1:55 pm
- Forum: AEM
- Topic: Frame error in NT - Works fine in HyperTerm
- Replies: 7
- Views: 5500
- Wed Jun 20, 2012 12:47 am
- Forum: AEM
- Topic: Frame error in NT - Works fine in HyperTerm
- Replies: 7
- Views: 5500
Re: Frame error in NT - Works fine in HyperTerm
it seems to "glitch" at the start with a XX.X then corrects to X.XX
- Tue Jun 19, 2012 10:00 pm
- Forum: Hardware Enhancements
- Topic: AEM Boost Gauge > Serial output
- Replies: 7
- Views: 6393
AEM Boost Gauge > Serial output
I have an AEM boost gauge. It has serial out.
Is there a way to incorporate the feed into nistunes logs, just like wideband O2's?
Is there a way to incorporate the feed into nistunes logs, just like wideband O2's?
- Tue Jun 19, 2012 9:57 pm
- Forum: AEM
- Topic: Frame error in NT - Works fine in HyperTerm
- Replies: 7
- Views: 5500
Frame error in NT - Works fine in HyperTerm
I think I know the problem (and it probably requires mods to NT), but here goes: OK so when I connect to the gauge via HyperTerminal I get the proper output. In NisTune I just get errors that tick over till they tally 100. I believe this is happening because my gauge is set to P01 (Lambda) I set it ...
- Fri Nov 05, 2010 8:51 pm
- Forum: Test Results
- Topic: R33 with flat spot after Nistuned
- Replies: 7
- Views: 7069
Re: R33 with flat spot after Nistuned
I think you may be on to something in regards to the TPS switch. I've dropped the value to 300 an I'll see how it goes.
Thanks for the additional information I'll investigate that also.
Thanks for the additional information I'll investigate that also.
- Fri Nov 05, 2010 12:22 pm
- Forum: Test Results
- Topic: R33 with flat spot after Nistuned
- Replies: 7
- Views: 7069
Re: R33 with flat spot after Nistuned
Inside Nistune, on the consult display window does the TPS idle light disappear when you put your foot on the throttle? Yes. Mine is set to 320 Just want to make sure its not using idle timing tables or anything like that. With R32 ECU there are two timing tables when TPS=off (Main timing, knock ti...
- Tue Nov 02, 2010 12:01 pm
- Forum: Test Results
- Topic: R33 with flat spot after Nistuned
- Replies: 7
- Views: 7069
Re: R33 with flat spot after Nistuned
What injectors are you running? Stock. My car is a s1.5 with s2 type coils, so my guess is what ever a s2 came out with. I sent you a PM on the S:AU forums to look at the thread over there if you have the time? People are saying I have extra timing maps or I could have an Auto ECU??? I'd appreciate...
- Sun Oct 31, 2010 3:26 pm
- Forum: Test Results
- Topic: R33 with flat spot after Nistuned
- Replies: 7
- Views: 7069
R33 with flat spot after Nistuned
Hi everyone, I'm hoping that someone can help me with a flat spot that occurs whilst my car is cold (It's also a little harder to start in the mornings). The Car: R33 GTS-T, T04 turbo, Z32 MAF, Bosch Fuel pump, manual boost controller (bleeder), Splitfires, Nistune on a R32 ECU (s/w emulated idle sw...
- Tue Sep 07, 2010 9:17 am
- Forum: Type 2
- Topic: Is a injector rewire required for rb25 using rb20 ecu
- Replies: 5
- Views: 2430
Re: Is a injector rewire required for rb25 using rb20 ecu
Is there any firmware that removes this need to swap wires? I have been running for 6 months now without the wires swapped could be the reason for the slow build up of boost and the occasional missing hopefully I haunt screwed anything up too bad. I have the same problem. Matt I don't understand wh...
- Wed May 05, 2010 5:30 pm
- Forum: General Nistune Discussion
- Topic: Windows CE Port?
- Replies: 1
- Views: 1567
Windows CE Port?
Is it possible to port Nistune to Windows CE and skin the gauges like the GTR-R35 touch screen?
Then we could install it on Navman's etc.
Then we could install it on Navman's etc.