Search found 9 matches

by Kboot6
Fri May 06, 2016 11:11 am
Forum: Type 2
Topic: Low raw fuel values using e85
Replies: 5
Views: 2464

Re: Low raw fuel values using e85

values that high? what about e85?

don't rb20 have pressure compensated fuel reg from standard anyway. that's why I installed one. When i bought the engine the previous owner had one. Then i put a turbosmart 1200 on. And set to 43psi with vac line off at idle.
by Kboot6
Fri May 06, 2016 8:15 am
Forum: Type 2
Topic: Low raw fuel values using e85
Replies: 5
Views: 2464

Re: Low raw fuel values using e85

I do have a turbosmart rising rate fuel reg.
by Kboot6
Thu May 05, 2016 4:21 pm
Forum: Type 2
Topic: Low raw fuel values using e85
Replies: 5
Views: 2464

Low raw fuel values using e85

Hi people I have tuned my rb20 on e85. All my values in the raw fuel map high load high rpm are down to around under 6 and still super rich . Is my injection multiplier to high at cruise (set to lambda at cruise). And if lowered would that give me a little bit more room in my map to play. My setup 1...
by Kboot6
Wed Apr 20, 2016 2:19 pm
Forum: General Nistune Discussion
Topic: Ultra high injector latency - too high
Replies: 3
Views: 2133

Re: Ultra high injector latency - too high

Im also a beginner What i found i had to do was adjust the injection multiplier up untill it wanted to run. That was with the latency set at 990us for my 1000cc injectors. Im not sure what your latency values are supposed to be for your injectors. I think they are around 700us. Have a search. Let us...
by Kboot6
Wed Apr 20, 2016 2:10 pm
Forum: Innovate
Topic: Wideband losing connection
Replies: 0
Views: 57863

Wideband losing connection

When the car is running i have nistune connected the lm2 powered up and plugged into computer. When i go to connect to the wideband nistune hesitates and then says wideband disconnected. So this is annoying because i cant log in nistune and im tearing my hear out
by Kboot6
Wed Apr 20, 2016 1:34 pm
Forum: Innovate
Topic: Lm2 device and windows 10 no driver update
Replies: 2
Views: 6348

Re: Lm2 device and windows 10 no driver update

Ok so. I got onto innovate tech support and there are drivers you can install under the logworks 3 program files.
by Kboot6
Tue Apr 19, 2016 5:55 pm
Forum: Innovate
Topic: Lm2 device and windows 10 no driver update
Replies: 2
Views: 6348

Lm2 device and windows 10 no driver update

Has anyone had and drama using the lm2 on a windows 10 computer. i have tried updating the driver and windows says none can be found.
i had no problems with windows 7

thanks guys
by Kboot6
Fri Apr 01, 2016 10:12 pm
Forum: General Nistune Discussion
Topic: Tuning only for ethanol with no flex sensor
Replies: 3
Views: 2191

Re: Tuning only for ethanol with no flex sensor

yes ok. easy i was thinking that the ecu would chase 14.7 afr not lambda, if it does chase lambda makes it exactly the same as you would tune for unleaded then?
correct?
by Kboot6
Fri Apr 01, 2016 10:08 am
Forum: General Nistune Discussion
Topic: Tuning only for ethanol with no flex sensor
Replies: 3
Views: 2191

Tuning only for ethanol with no flex sensor

Want to know if it will be possible to tune with ethanol only and no flex sensor. Has anyone achieved this. Wouldnt you have to disable o2 sensing so the fts and ftl dont chase 14.7.

Thanks