Nistune Forums

I am getting the subject message, i.e.,: CONSULT not connected!! COM1 spare; COM3 spare (COM1 is used by AEM wideband and COM3 is for the Consult/Nistune). Here is my setup: R32 Skyline with RB20DET ECU Using PLMS USB Consult cable Nistune - latest version (updated on July 30, 2008) I have successfu...

Hello all, After I tuned my car in early July this year with Nistune, it has been runnign great. However, yesterday, I tried to reconnect NIstune thru my PLMS USB consult cable and it just wouldn't connect at all. Since I successfully used Nistune the last time, there has been NO change either in my...

Hi all, Finally got the car to run much better. I recently connected my AEM UEGO through the serial port to my laptop and started the hyper terminal. Worked like a charm. Then I went on to connect it while in Nistune, and it didnt work at all. The map comes up, but stays blank, with no values showin...

Gotcha!! Now how do I change the scale for rpm on the maps? It only goes to 6400 rpm and I need it to go to around 8000 rpm. I am guessing its done in the map scale section, and it changes the scale, but do I then need to change the values too or can I continue with the values in the fuel and ign ma...

The Nistune tuning guide ...........is that the one by Pete? I have a copy of it, but its mostly blank in the end. Does anyone have an updated copy of it? Where is the AFR 3D trace? I couldnt find it in Nistune. How do I change the rpm level scale values? It goes only up to 6400 rpm and there is not...

Hi everyone. Finally installed NISTune and I must say the initial impressions are very good. Now for the weird part. This is my setup and maybe some of you may be running similar setups or at least can help me: R32 Skyline with RB20DET ECU, harness/loom running an RB25DET engine. I am also running a...

thanks for the link. I have read that one and have a basic idea about tuning. But Nistune is not in hex, so I wonder if I will ever be using hex at all to tune. I am more concerned about the software itself and to understand its working and setting. I was looking for a guide for initial setup and al...

Hello everyone, I am from Canada and recently purchased Nistune Type 2 board. Still awaiting the installation in my car. I wanted to introduce myself and get people's input on my journey towards learning how to tune my ECU with Nistune. Here is what I have: R32 Skyline with RB25DET in it. I am using...