Nistune Forums

my neutral switch is not hooked up. Where do I see if my start switch is working?

I would like to re open this topic. Not a neo but i have a rb25det. Mine tps has to be set to .10v for it to close the idle switch. Wot is about 3.6 as well. I cant figure out how to program it to idle at .48v. Im also having a problem when I'm lightly on the throttle in second. It will start leanin...

what TPS are you guys running on your s2 rb25s? I currently have one from an Infiniti but think it might be going bad.

Hey matt, SO im pretty sure I dont have a exhaust restriction. 3" down pipe to 3.5" exhaust under the car to a y pipe that goes to 2 2.5" pipes and ends. i changed my filter on my intake and still having the same issue. i guess it could be sucking closed a coupler or something. i did ...

sorry about the duplicate post. thought the other thread would be better spot for this but this thread works for me.

i am seeing it at 39.29 seconds, attached is a screen shot of where my issue is.

here is a log of a 2nd to 3rd gear pull

here is a log of a pull

in the ecu notification box it doesnt show want it is being held out on.

That could be it. Im not sure where to find that setting. here is my tune

Hey guys, I have a s2 RB25DET with ebay greddy intake. godspeed top mount exhaust manifold. bullseye 56 AR turbo. 550cc injectors. walbro 255l fuel pump. ls2 coil pack upgrade. a z32 tt maf sensor. last year i was running 10 psi boost, i had my rev limiter set to 7k and i had no problems bouncing of...

Hey guys, I have a s2 RB25DET with ebay greddy intake. godspeed top mount exhaust manifold. bullseye 56 AR turbo. 550cc injectors. walbro 255l fuel pump. ls2 coil pack upgrade. a z32 tt maf sensor. last year i was running 10 psi boost, i had my rev limiter set to 7k and i had no problems bouncing of...

Hey guys,
where do you get tunes people put on here? i have a s2 rb25det with 550cc injectors and a z32 maf with a z32 ecu.

hey, I am very new to nistune. Working on getting my car to run good. I was wondering were or if anyone has some tune setups that they use on here that I could drop onto mine and tweak it from there. I have a rb25det with 550cc injectors, z32 maf, and a walbro 255l fuel pump. waste gate spring is se...

I have a question regarding this. My idle light illuminates but it illuminates when the tps is at 0.3v. now is that okay? i have heard that when the throttle is closed it has to be around 0.5v closed and around 4.5v wot.

Matt wrote:ECU plug. See document I was referring to which you should be wiring against

That ecu pinout diagram, is that harness side or terminal side?