Search found 14 matches

by rsfire
Sun May 25, 2014 7:14 am
Forum: Type 1
Topic: Super lean issue
Replies: 6
Views: 3297

Re: Super lean issue

Hmm do you think the injectors would be my best bet, if they're getting the signal from the ecu but just not opening how they should? Do you have any thoughts? And i did switch to my stock ecu and it runs rich, like 12 to 13ish AFR while cruising(i have no o2 sensor if that causes that) but under fu...
by rsfire
Sat May 24, 2014 4:19 pm
Forum: Type 1
Topic: Super lean issue
Replies: 6
Views: 3297

Re: Super lean issue

More info- so i tested out my original 86T ecu and it works fine for the most part so far. So I'm assuming something is wrong with my nistuned ecu and not the cae, i have no idea what to look into for fixing it.
by rsfire
Sat May 24, 2014 12:43 pm
Forum: Type 1
Topic: Super lean issue
Replies: 6
Views: 3297

Re: Super lean issue

Yeah that was first thought, I checked my fuel pressure and it's 37 idle and up around 40 revving, but I'm not sure what it does while driving.
by rsfire
Sat May 24, 2014 11:43 am
Forum: Type 1
Topic: Super lean issue
Replies: 6
Views: 3297

Super lean issue

So yesterday when I went to drive my car in the morning it would barely move, it would just run full lean and die. I got in from work the night before and it had been driving perfect, as it has been for awhile. I haven't touched a thing before it started this issue. I tried loading several different...
by rsfire
Mon Mar 24, 2014 11:39 am
Forum: Type 1
Topic: stock z31 blow through maf
Replies: 5
Views: 2786

Re: stock z31 blow through maf

Oh man, that's not good! Haha
by rsfire
Fri Mar 21, 2014 5:30 am
Forum: Type 1
Topic: stock z31 blow through maf
Replies: 5
Views: 2786

Re: stock z31 blow through maf

Oh ok that makes sense, is t just oil and stuff from the turbo and stuff. Do you just routinely take it out and spray it down with maf cleaner?
by rsfire
Tue Mar 18, 2014 6:52 am
Forum: Type 1
Topic: stock z31 blow through maf
Replies: 5
Views: 2786

stock z31 blow through maf

So I've been researching blow through mafs a bit and have a couple questions. Has anyone run a stock maf in blow through configuration? I've read some people did and it ran great. But I've also read its super hard to tune since the air densities and temps are ao far off from stock configuration due ...
by rsfire
Wed Feb 05, 2014 11:47 am
Forum: Type 1
Topic: z31 o2 sensor voltages
Replies: 7
Views: 3290

Re: z31 o2 sensor voltages

Yeah it's all over the place. I have an AEM wideband so I'm not too sure if it can be recalibrated, I know it says all over that it never needs to be, but i'll need to keep searching to see if there is a way. I'm not sure if you meant that or do one of the tests to make sure its in normal operating ...
by rsfire
Tue Feb 04, 2014 3:06 pm
Forum: Type 1
Topic: z31 o2 sensor voltages
Replies: 7
Views: 3290

Re: z31 o2 sensor voltages

Oh and just for the heck of it, I'll attach my last data log incase someone is really feeling helpful haha. I did a 3rd and 4th gear pull then caught up to traffic and was cruising around 55-60ish until I end the datalog. And I know my speed doesn't show, my speed sensor to the ecu must be out. I'm ...
by rsfire
Tue Feb 04, 2014 2:56 pm
Forum: Type 1
Topic: z31 o2 sensor voltages
Replies: 7
Views: 3290

Re: z31 o2 sensor voltages

Yep, I have an 86 non turbo ecu, so both turbo and non turbo are the titania. Ok good to know, must be a shot o2 sensor then. Though it seems to run much more normal ratios cruising since I turned off o2 sensing in nistune. But cruising and under boost has AFRs kind of all over the place. After I le...
by rsfire
Tue Feb 04, 2014 7:10 am
Forum: AEM
Topic: aem to vga port?
Replies: 2
Views: 3184

Re: aem to vga port?

I know it's for video, but figured it would be worth asking just incase. It would be much cheaper if so. But yes, I just got the serial to usb cable and it's working correctly. Thanks!
by rsfire
Tue Feb 04, 2014 5:40 am
Forum: AEM
Topic: aem to vga port?
Replies: 2
Views: 3184

aem to vga port?

I've got an aem wideband but my computer doesn't have a serial port, so i was wondering if there is a way to hook it up to my vga port, or is it totally different? Will i just need to get a serial to usb connection or something?
by rsfire
Tue Feb 04, 2014 3:41 am
Forum: Type 1
Topic: z31 o2 sensor voltages
Replies: 7
Views: 3290

Re: z31 o2 sensor voltages

Ok thanks, I'll research how to tune it open loop
by rsfire
Mon Feb 03, 2014 8:47 pm
Forum: Type 1
Topic: z31 o2 sensor voltages
Replies: 7
Views: 3290

z31 o2 sensor voltages

Hello, so I just got Nistune in my 86T. The car runs but too rich under light load, it's in the 12 AFR range on my wideband while cruising with light load. I took a datalog and noticed that while the engine is still warming up, my o2 sensor voltage jumps back and forth between 0.05 and and 2.55V til...