Search found 7 matches

by Ross
Thu Jan 11, 2018 4:08 am
Forum: Type 2
Topic: R32 RB26DETT 05U6F Knock
Replies: 4
Views: 1639

Re: R32 RB26DETT 05U6F Knock

Thanks Matt. I always use my knock headphones, but love the ECU functionality as a back-up if possible :D
by Ross
Sat Jan 06, 2018 8:26 am
Forum: Type 2
Topic: Rb26 stands alone loom
Replies: 3
Views: 1225

Re: Rb26 stands alone loom

Yes, Nistune connects through the Consult port. This can be wired directly to the ecu; it's not necessary to use the port in the OEM location.

Also yes, you would connect both MAF signals together to one MAFS.

Regards,

Ross
by Ross
Thu Jan 04, 2018 11:24 am
Forum: Type 2
Topic: Dwell time/length
Replies: 13
Views: 8215

Re: Dwell time/length

Now I'm concerned that reporting is wrong for my BNR32 ECU as well because I was getting ~1ms down to ~.100ms as well. I increased the dwell vs voltage tables by 100% and it is reporting near 3ms but still trickling down well under 2ms at high RPM. I don't have a good oscilloscope right now to verif...
by Ross
Thu Jan 04, 2018 8:38 am
Forum: Type 2
Topic: R32 RB26DETT 05U6F Knock
Replies: 4
Views: 1639

Re: R32 RB26DETT 05U6F Knock

I believe I just found my answer on page 64 of the Users Manual V1.9. It states that knock detection counting firmware is in progress for the BNR32 RB26; any idea on a time frame?

Kind regards,

Ross
by Ross
Thu Jan 04, 2018 8:33 am
Forum: Type 2
Topic: R32 RB26DETT 05U6F Knock
Replies: 4
Views: 1639

R32 RB26DETT 05U6F Knock

This ECU is capable of knock recording and control, correct? While connected to the ecu, the knock warning panel will not display. It will display when viewing logs while disconnected, but the knock limits window grayed out (see attached). Also, "Mark Knocking" is grayed out on the maps. I...
by Ross
Thu Sep 28, 2017 6:37 am
Forum: Type 2
Topic: E85 maps Activation
Replies: 14
Views: 7070

Re: E85 maps Activation

Is there an update in the works that would allow me to negate only fuel maps? Or input negative numbers? I don't need the ecu to do any triggering of course, just be triggered to run the flex maps as it already can be. Is there already a nitrous firmware update that could be negated? I just want to ...
by Ross
Wed Sep 27, 2017 5:56 am
Forum: Type 2
Topic: E85 maps Activation
Replies: 14
Views: 7070

Re: E85 maps Activation

Matt, I hate to revive this old thread but I need to do this as well for methanol injection mapping. The trouble is that the fuel and timing offsets are both adders, and with methanol injection I will have to remove fuel and add timing. Is there a way to input negative values into the fuel offset ma...