Nistune Forums

Cool! Thanks for the info and your hard work! Are you talking about hooking up the consult usb cable first before hooking up the DLP USB cable or clicking on the consult button in nistune first before clicking on WBO2 button? Also, can you comment on the highlighted tables in my screenshot? Still cu...

Angle/Matt, I finally was able to get 1 of my wbo2 logging today! Thanks everyone for all the help! My issue was (I hope it was) with the "Wideband Lookup Table Location" configuration. It was set to the parent directory: "C:\Program Files\NIStune\Wideband" VS "C:\Program Fi...

Matt, I am assuming you are talking about the configuration screen (I am attaching a screenshot of my configuration). I am going to go back and re-read the WBO section in your manual...maybe I missed something. I see a few more settings on the lower left corner that deal with WBO2 stuff. Also, just ...

Matt, I am not using the serial output... None of my notebooks have a serial port, hence why I purchased the D/A converter. Even though my signal from the WBO is 0v...shouldn't I be getting a 10 A/F in nistune if my look-up table maps 0v --> 10 A/F? Just not sure where the 9 A/F is coming from when ...

Angle - Thanks for the information! Now I am more confused... I used a voltmeter on the white wire (description for white wire from manual: Connects to any auxiliary unit that accepts a 0-5v input) and get 0v no matter what the WBO display reads. I have 2 AEM gauges (bank 1 & 2) and they are bot...

Anyone with this setup? I am still having the same issues with WBO logging. I am questioning my wiring with the DLP at this point...

I quickly had a chance to hook up the DLP converter/WBO2 with Nistune this weekend. When I started logging the output for the WBO2...the output was 9. I didn't have a lot of time to spend debugging the issue...had baby duty. Just double checking if I need to hook up anything to the 5V input on the D...

I will post results when I get a chance to configure and test the D/A converter. I'll double check the attachment. Thanks again! Angelo

Correct me if I am wrong...is the look-up table information I am looking for (voltage --> AFR mapping definition) located in the table on page 5-6 of the UEGO instructions (attachment located in the "I cant Connect my Wideband to my Laptop? AEM UEGO" thread...second post in this section)? ...

Matt, Thanks for the prompt response! Excuse my ignorance...how do I go about logging the wbo2 voltage in Nistune? Can you provide more detail or a section in your user manual that describes how to do this? I have read and searched, but cannot locate this information. Is this something I can log wit...

Anyone know what values the look-up config file should have for the DLPADConverter (afr1.csv)? Also, wanted to verify the wire configuration: D/A converter------UEGO WBO2 GND Pin-------------Black (Ground) Pin#1----------------White (0-5 Volt Output) Do not connect the Blue (Serial) and Red (12V) wi...

I will let you know if I have any issues. Thanks again!!

Angelo

I have 2 wideband sensors (driver and passenger side) and would like to log both using nistune. Do I need to purchase two D/A converters to interface both wbo2? Note: 1) I am using AEM UEGO wbo2s, which supports serial output; 2) Notebook does not have a serial port. Is this configuration even possi...