Search found 43 matches

by Stick
Fri Jul 05, 2019 11:33 am
Forum: Type 3/4/5
Topic: WGC34 Stagea Tuning
Replies: 66
Views: 20966

Re: WGC34 Stagea Tuning

Anything other than 12800 and it causes the problem.

Yeah, its really odd, its driveable when it does this but timing still flops about all over the place. I've just set it back to 12800 for the time being
by Stick
Tue Jul 02, 2019 11:45 am
Forum: Type 3/4/5
Topic: WGC34 Stagea Tuning
Replies: 66
Views: 20966

Re: WGC34 Stagea Tuning

Matt, Still having issues trying to set launch control parameters. Ive attached logs of when LC Rev Limit Retard is set to my desired rpm of 4800 and causes problems, and then another log if it is set to 12800 and works fine. As you can see in the 4800 log, when the throttle is pressed slightly, the...
by Stick
Tue Apr 02, 2019 10:44 am
Forum: Type 3/4/5
Topic: WGC34 Stagea Tuning
Replies: 66
Views: 20966

Re: WGC34 Stagea Tuning

Was trying to set it to 4500rpm. Worked in the past.
by Stick
Tue Apr 02, 2019 8:49 am
Forum: Type 3/4/5
Topic: WGC34 Stagea Tuning
Replies: 66
Views: 20966

Re: WGC34 Stagea Tuning

Having some issues with TPS still (cant reset TPS idle). Finally got around to reconnecting the factory boost sensor, which made the car idle funny, disconnected it and it would stop. Idles ok (if TPS idle active), but as soon as the TPS idle flag drop from just cracking the throttle, it hunts RPM ...
by Stick
Mon Apr 01, 2019 9:28 am
Forum: Type 3/4/5
Topic: WGC34 Stagea Tuning
Replies: 66
Views: 20966

Re: WGC34 Stagea Tuning

So seems i am still having the issue when trying to change LC Rev Limit Retard. Same issue as above. Nistune is version 1.3.0
by Stick
Tue Feb 12, 2019 9:18 am
Forum: Type 3/4/5
Topic: WGC34 Stagea Tuning
Replies: 66
Views: 20966

Re: WGC34 Stagea Tuning

Ignore the warning about the flags. I noticed that here too with my car, so it needs to be fixed Ok, will do. That's right, you had 'stubbed' the voltage for the pressure regulator Yep, for now. I'll have to get a brand new one. Will the Neo ECU do boost control like the S15 ecu? There was a glitch...
by Stick
Thu Feb 07, 2019 5:51 pm
Forum: Type 3/4/5
Topic: WGC34 Stagea Tuning
Replies: 66
Views: 20966

Re: WGC34 Stagea Tuning

Ive worked out (i think) what is causing the "chugging". So after chucking the tune back on, i had noticed a while back that the LC Rev Limit Retard was set to 12600rpm, i hadn't changed it, and i was correctly set ages ago (4500, fuel cut was 4800), so i changed it back to 4500.. chugs. C...
by Stick
Thu Feb 07, 2019 2:27 pm
Forum: Type 3/4/5
Topic: WGC34 Stagea Tuning
Replies: 66
Views: 20966

Re: WGC34 Stagea Tuning

Check mixtures at cruise (2000rpm) with boost sensor connected. TPS idle voltage should be around approx 0.5V to 0.7V. What does it currently sit at I can't check, i've got a voltage reg feeding 5.02v (as my original one had the nipple broken off and had the flags turned off). Ive got the TPS idle ...
by Stick
Wed Feb 06, 2019 6:25 pm
Forum: Type 3/4/5
Topic: WGC34 Stagea Tuning
Replies: 66
Views: 20966

Re: WGC34 Stagea Tuning

Having some issues with TPS still (cant reset TPS idle). Finally got around to reconnecting the factory boost sensor, which made the car idle funny, disconnected it and it would stop. Idles ok (if TPS idle active), but as soon as the TPS idle flag drop from just cracking the throttle, it hunts RPM a...
by Stick
Wed Oct 24, 2018 2:12 pm
Forum: Type 3/4/5
Topic: RB25 Neo TPS reset/relearn
Replies: 14
Views: 5786

Re: RB25 Neo TPS reset/relearn

Hi Matt,

Could the neutral switch not being connected be causing this problem? i have tried every possible scenario to get the TPS to reset, but no luck. Im thinking outside the box, and maybe ecu needs to see neutral to perform the learning.
by Stick
Wed Jul 25, 2018 9:40 pm
Forum: Type 3/4/5
Topic: RB25 Neo TPS reset/relearn
Replies: 14
Views: 5786

Re: RB25 Neo TPS reset/relearn

Hmm, confusing.

Thanks Matt
by Stick
Mon Jul 23, 2018 1:46 pm
Forum: Type 3/4/5
Topic: RB25 Neo TPS reset/relearn
Replies: 14
Views: 5786

Re: RB25 Neo TPS reset/relearn

What happens if i am seeing the "start signal" in the consult viewer?
by Stick
Thu Jul 19, 2018 1:26 pm
Forum: Type 3/4/5
Topic: RB25 Neo TPS reset/relearn
Replies: 14
Views: 5786

Re: RB25 Neo TPS reset/relearn

The start switch being the key?

Would you know what pin on ECU it should go to on the neo?

And if it does see the "start switch", does that mean it zeros the TPS position as closed, so to speak?
by Stick
Wed Jul 18, 2018 1:34 pm
Forum: Type 3/4/5
Topic: RB25 Neo TPS reset/relearn
Replies: 14
Views: 5786

Re: RB25 Neo TPS reset/relearn

No, it appears that it doesnt/

What is the "Start Switch" input related to?
by Stick
Tue Jul 17, 2018 9:45 pm
Forum: Type 3/4/5
Topic: RB25 Neo TPS reset/relearn
Replies: 14
Views: 5786

RB25 Neo TPS reset/relearn

Hi all, Anyone know how to reset the Neo TPS? Ive seached the interwebs and cannot find anything solid. I can only set mine to 0.30v, anything over and it ups the revs to 2000rpm, adjusting the IACV does nothing. Also peaks at WOT at 3.63v. Obviously its out of nissan spec of 0.45 - 4.2v. Ive tried ...