Nistune Forums

Just incase anyone else reads this thread, i'd like to post some sort of conclusion. After working with Matt a bit and some local contacts/tuners here in the states, I was not really able to get the type-3 board to respond the way I wanted it to. We/I tried to rebuild 16-bit files from scratch to ge...

Car just doesnt respond at idle.. i've tried like 3-4 tunes, resized the injectors a few different ways... unplugged the o2, plugged in the o2, checked voltages, temps, fuel pressure... injection time just sits up at like 1.8 and it bogs with a rich idle thats like 150 rpm above norm. Checked with l...

Would it make sense that my issue w/ TP/load was due to incorrect scale maps for fuel/timing/etc. ? I made adjustments with someones help and now have pretty good afr at cruise in 2nd/3rd and it richens up when boosting more like i'd expect. Still needs work in that dept and some 4th gear work. On t...

Having issues tuning a 95 Z32 TT. Car is running crazy rich at idle and my changed in nistune to K/Latency do not seem to affect the tune in the slightest. I have been testing my stock tune, which the car just about quits on due to the injectors being set for 370cc. (I have 740cc) and a tune from a ...

Was there ever a solution to this ? My 95 TT is running rich as all hell at idle... seems to lean out when I am driving at cruising speeds, but not as rich as I'd like during boost and if I am sitting still meaning in neutral and stepping on the gas at all, it stays rich. Adjusting my injector laten...

man, I am having the same problems right now on a z32 vg30dett w/ a 16-bit ecu. (51P60) i can download the bin from the ECU and pull up all of the gauges, but I cannot write to it. I get a checksum error corruption detected on consult line message. Attached log file. Also: I never jumpered the ECU, ...

I have a tune that I am trying to use, but it is from a type-2 board for a Z32 VG30DETT. I have a newer ECU and a type 3 board that uses a 32k bin file. Aside from going in and making the appropriate changes manually, is there an easy way to make this conversion between the two so I can use the prop...

hrmm, anyone know if you can daisy chain these MTX-L's and have them both work with nistune through a single serial port?

ie: wbo2-1 -> wb02-2 -> PC