Search found 22 matches
- Fri Jun 19, 2020 9:03 am
- Forum: Software Bugs
- Topic: 1.3.25 update error on both of my notebook and pc
- Replies: 7
- Views: 5461
Re: 1.3.25 update error on both of my notebook and pc
I have some probs connecting to my Acer notebook, running windows XP.
- Mon Aug 17, 2015 2:49 am
- Forum: Type 2
- Topic: Warm start flooding Z32 FP
- Replies: 7
- Views: 2757
Re: Warm start flooding Z32 FP
More testing, i saw that not only the injection ms goes skyrocket when i hit the throttle, but the Ing timing goes down! all this below 60º coolant
I have done this log
I have done this log
- Sun Aug 16, 2015 10:50 am
- Forum: Type 2
- Topic: Warm start flooding Z32 FP
- Replies: 7
- Views: 2757
Re: Warm start flooding Z32 FP
Hi! i have try do make the changes but it stayed the same! And something strange happened...after this adjustments.... at first, in cold start the engine starts fine at first, (in cold) if i try to rev the engine a bit it floods right away! and the engine shut down!, it starts fine again right away!...
- Thu Jul 23, 2015 6:29 am
- Forum: Type 2
- Topic: Warm start flooding Z32 FP
- Replies: 7
- Views: 2757
- Mon Jul 20, 2015 2:38 am
- Forum: Type 2
- Topic: Warm start flooding Z32 FP
- Replies: 7
- Views: 2757
Warm start flooding Z32 FP
Hello! Got my Nistune upgraded to the new firmware to use the FP upgrades, need to make some adjustments for my fuel setup (nismo 740) since old maps dont work anymore. Engine runs perfect AFR´s, the only issue is at warm start it injects too many fuel and is hard to start, in cold start is perfect!...
- Tue Dec 24, 2013 11:47 pm
- Forum: Type 2
- Topic: Z32 Fuel pump/controler going bad?
- Replies: 2
- Views: 1635
Z32 Fuel pump/controler going bad?
Some days ago my car have start to make +12 AFR on WOT it was running fine at 11.5 AFR in WOT and i log the nistune and the target AFR is around 11.3, also log some runs and all the other sensors( MAF etc) are fine. Injectors, fuel filter, fuel regulator is new. The fuel pump/controler and damper ar...
Re: ADR files
Any one whit the 300ZX TT Mines ecu bin file to share or trade?
I have
ash nismo 740 single
SZ 555 nismo single
SZ 740 Dual
and some more..
I have
ash nismo 740 single
SZ 555 nismo single
SZ 740 Dual
and some more..
- Mon Apr 01, 2013 9:05 am
- Forum: Type 2
- Topic: How much timing to remove initially for high boost Z32?
- Replies: 6
- Views: 2800
Re: How much timing to remove initially for high boost Z32?
For safety take -1º degree for +1 pound of boost increase
- Mon Dec 24, 2012 10:38 am
- Forum: Type 2
- Topic: TP load scale
- Replies: 9
- Views: 6499
Re: TP load scale
Got it! tks mattMatt wrote:Also look at the graph using the 2D scale also (Fuel scale) when smoothing. You usually want more resolution (closer numbers) at the top end
- Mon Dec 24, 2012 1:22 am
- Forum: Type 2
- Topic: TP load scale
- Replies: 9
- Views: 6499
Re: TP load scale
read old, but good Pete's post about rescaling. forum.nistune.com/viewtopic.php?f=12&t=763 Good info tks :) Good? no? :) BAD. you didnt understand that topic which I gave you. Why you should need so much points between 0 and 40? It could be in 4-5 columns because this is no load area. While 50-...
- Sat Dec 22, 2012 7:13 am
- Forum: Type 2
- Topic: TP load scale
- Replies: 9
- Views: 6499
Re: TP load scale
read old, but good Pete's post about rescaling. forum.nistune.com/viewtopic.php?f=12&t=763 Good info tks :) I did this changes in my map in the TP scales, is bit big scale because in my actual tune at only 16psi of boost i hit the 76 TP load... my turbos (GT2860RS) have a lot more to give. Also...
- Thu Dec 20, 2012 11:46 pm
- Forum: Type 2
- Topic: TP load scale
- Replies: 9
- Views: 6499
Re: TP load scale
Yes this is what should be done next. Rescale the TP load scale for fuel and timing upto the maximum load read (see tuning guide for more info) Tks matt, i did this changes compared to the "stock" tune http://i1148.photobucket.com/albums/o576/lpskynet/loadsacleigfuel_zps5f53363f.png Also ...
- Thu Dec 20, 2012 9:27 am
- Forum: Type 2
- Topic: TP load scale
- Replies: 9
- Views: 6499
TP load scale
I have done some logs/runs to tune the AFR´s , and i saw that i hit the max TP load in the fuel map and ignition (they are set to 64) http://i1148.photobucket.com/albums/o576/lpskynet/Loadsacle_zpsccd2da93.png should i rise up my scale to 76/80 like it show in the multiple display? http://i1148.phot...
- Mon Dec 17, 2012 3:39 am
- Forum: Type 2
- Topic: Runing very rich in 4º and above! (Z32 VG30DETT)
- Replies: 4
- Views: 2615
Re: Runing very rich in 4º and above! (Z32 VG30DETT)
A&M-Motorsport wrote:Its i nice thing the upper gear maps. You can do a more agressiv timing map.
Here are more infos: viewtopic.php?f=8&t=2472
Nice! i must try that tks mate
- Thu Dec 13, 2012 7:45 am
- Forum: Type 2
- Topic: Runing very rich in 4º and above! (Z32 VG30DETT)
- Replies: 4
- Views: 2615
Re: Runing very rich in 4º and above! (Z32 VG30DETT)
Yep thats it!
I Set the 'high gear coeff' parameter to 0 and now i get 12 air fuel ratio in high gears
Tks matt
I Set the 'high gear coeff' parameter to 0 and now i get 12 air fuel ratio in high gears
Tks matt