Nistune Forums

If this town had a place you could actually get brass fittings then I'd be setup to make a map. My regulator isn't a real "fine" adjustment. But with some fiddling I can get close enough to make a usable map. Every 2 psi or so should be accurate enough for now. There is no min/max limit on...

I gave it a day for the Z31 guys to come forward. Of course they didn't. :( Has anyone created a map of the stock boost sensor showing the relation between voltage and boost or vacuum? Bernard had posted one for the 280zx sensor but I have verified it is not correct for the Z31 sensor. FYI it would ...

Older laptops with less than 1024x768 cannot see everything they need. Re sizable windows would greatly help that. It would be nice to be able to see more than 4 items in the consult logger in one view. I "think" you can add them to "selection1", "selection2", etc. But ...

91124 fixed my incorrect AFR problems. I'm still seeing some disconnects from the techedge. But I'm pretty sure it is related to the laptop, not any of the cars hardware/software.

Very inaccurate. didnt really move off 20:1, i had just started car so it was running about 13:1 cold. If i gave engine a rev they went to about 17:1, still way out. I've been having this problem too with 91122. I've updated to 91124 and will test it tomorrow. I've confirmed my afr with tewblog sev...

For everyone to view:

Sent.

I'm emailing 3 quick photos. If you want better ones let me know and I'll take care of it.

I was planning a short writeup for a few forums with pictures anyway. I'll get it done in the next few days and send it to you. Feel free to use any or all of it.

Type 1 Rev 3a board on 88-89 z31 ecu: According to page 18 of the hardware installation pdf version 2.0 the wires should be: 6802 pins - Wire #'s Pin 37 - #4 Pin 34 - #1 Pin 25 - #3 Pin 24 - #2 The connector is labeled with a "1" which I am assuming is the key to pin 1. The problem now lie...