Search found 69 matches

by streetbike
Fri Apr 27, 2012 12:03 am
Forum: Test Results
Topic: GTX2863R on SR20
Replies: 13
Views: 21822

Re: GTX2863R on SR20

what exhaust manifold do you use on this setup ??

for the 2867 I will tell you how it will perform on a CA18 in a couple weeks
by streetbike
Thu Apr 26, 2012 11:57 pm
Forum: General Nistune Discussion
Topic: who has the highest horsepower nissan on nistune?
Replies: 15
Views: 8957

Re: who has the highest horsepower nissan on nistune?

415rwhp with GT3071R @ 1.7bar on a CA18DET and 1200cc injectors with E85 fuel.

now building more usefull version with a GTX2867R turbo
by streetbike
Thu Sep 29, 2011 7:23 am
Forum: Type 2
Topic: rb20det ecu running stock rb25det?
Replies: 5
Views: 3761

Re: rb20det ecu running stock rb25det?

maybe it can be possible to ad a tps sensor from rb20 or CA18 that have the idle switch ?
by streetbike
Fri Sep 09, 2011 5:39 pm
Forum: Type 3/4/5
Topic: S14a sr20det fuel not cut when descelerating
Replies: 6
Views: 2875

Re: S14a sr20det fuel not cut when descelerating

the car is under rebuild now so can't do the log ... will make it when back on the road.
by streetbike
Tue Sep 06, 2011 5:47 am
Forum: Type 1
Topic: batch fire of injectors - VLT
Replies: 22
Views: 10694

Re: batch fire of injectors - VLT

on the CA18DET it is also based on RPM I have tested lots of injectors on my car and for what I have seen it is TP based but if TP is not achieved until 4000rpm it force change to batch fire with 440cc it was at 3000rpm and 10ms pulsewidh, with 550cc it was at 3500rpm and 10ms pulsewidh, with 700cc ...
by streetbike
Wed Jul 27, 2011 10:10 pm
Forum: Type 3/4/5
Topic: S14a sr20det fuel not cut when descelerating
Replies: 6
Views: 2875

Re: S14a sr20det fuel not cut when descelerating

yes all 3 are working good .

I already have had this problem on a mates car but after 1 week , probleme disapear by itself ... dont know why !!

mabe this one will do the same ..
by streetbike
Wed Jul 27, 2011 9:07 pm
Forum: Type 3/4/5
Topic: S14a sr20det fuel not cut when descelerating
Replies: 6
Views: 2875

S14a sr20det fuel not cut when descelerating

Hi all I have an issue with an s14a sr20det from england, fuel does not cut when descelerate so lots of explosions at the end of the catback when lift off the gaz.

seems not to have fuel cut table on the type 3 sr20 , anyone with same problem ?

thank you
by streetbike
Sun Jun 19, 2011 3:46 am
Forum: Type 1
Topic: knock sensor issues CA18DET
Replies: 15
Views: 12000

Re: knock sensor issues CA18DET

ok ! because I tried one 330kohm and one 800kohm and I have the dtc code always on ...
by streetbike
Sat Jun 18, 2011 1:44 am
Forum: Type 1
Topic: knock sensor issues CA18DET
Replies: 15
Views: 12000

Re: knock sensor issues CA18DET

Matt wrote:you need a 500kohm resistor on each knock sensor line (two of them on this ECU) to get rid of the fault code and ignore knock completely

there is no feedback flag for this one that I know of for CA18

Do I need exactly 500kohm resistor or 470 or 540 can do the job ??
by streetbike
Fri Jun 17, 2011 10:14 pm
Forum: Type 3/4/5
Topic: 82fxx board on 83f04 ECU
Replies: 2
Views: 2043

Re: 82fxx board on 83f04 ECU

I have double checked the ecu number on my mates car . and He made a mistake .. his ecu is 82fxx .. so there is no problem !!

thank you for the answer.
by streetbike
Tue Jun 14, 2011 10:28 pm
Forum: Type 3/4/5
Topic: use S14 SR20det ECU on CA18DET ???
Replies: 11
Views: 7259

Re: use S14 SR20det ECU on CA18DET ???

I have seen for pin 106.

thank you for 11 and 12 !

I will test it to see if it runs best with my 75f00 ECU than ca18 ecu . maybe batch fire will work fine all the time !

will tell you when I test it. a big thank you for the help !
by streetbike
Tue Jun 14, 2011 10:21 pm
Forum: Type 3/4/5
Topic: 82fxx board on 83f04 ECU
Replies: 2
Views: 2043

82fxx board on 83f04 ECU

Hello all ! I have a 82f06 board in stock and one friend have a UK S14a with 83f04 ECU

can I use it ? on what I find 83fxx ECU are australian !! How can this be possible ?
by streetbike
Tue Jun 14, 2011 12:06 am
Forum: Type 3/4/5
Topic: use S14 SR20det ECU on CA18DET ???
Replies: 11
Views: 7259

Re: use S14 SR20det ECU on CA18DET ???

PL wrote:Looks like pins for coils vary slightly between the two (coils 1/2 OK, coils 3/4 different). Easy to fix though.

do you know what wires must I change ? that's the only thing I did'nt find .. thank you
by streetbike
Tue Jun 14, 2011 12:04 am
Forum: Type 3/4/5
Topic: use S14 SR20det ECU on CA18DET ???
Replies: 11
Views: 7259

Re: use S14 SR20det ECU on CA18DET ???

these injectors are known awesome but their price is way too hight .... and also I already have my injectors ( old bosch 1600cc low Z with peak and hold driver box) I have searched for informations on sr20 injection and on the s14 it is batch fire for start and error mode, but on normal conditions i...
by streetbike
Mon Jun 13, 2011 10:43 pm
Forum: Type 3/4/5
Topic: use S14 SR20det ECU on CA18DET ???
Replies: 11
Views: 7259

Re: use S14 SR20det ECU on CA18DET ???

pure batch fire on sr20 ??? bad news .... with 1600cc injectors it meens less than 1.0ms of injection time at idle !!!

are you sure of that ?