Nistune Forums

Where is the jumper that needs to be moved to use external memory?

A maxima user is confirmed and waiting with cash in hand for a board. Can you take a guess as to when he might have a board ready for testing?

stock binfile. used at present in both 89 and 91 ecu's.

it's much worse than you suspect (stinky know's all about my fondness of the map/nissan ecu setup) I'd like to use a known input for the iat along with a map rather than the maf and calc load that way. i'll go off on my own tangent for this and try some things.

Since we know the input for the fuel temp sensor for the z31 ecu, can we utilize this for another purpose........say an IAT combined with a map sensor? Assuming the code is doable. Or finding an unused or freeing up an output like the that idle controller and using to control water inj or boost cont...

In my case when injecting methanol the afr's are always going to be different from the calc'd afr's. It won't be consistant in my case either because the controller varies the alcohol as the maf voltage. I've been looking at the ford maf based systems which are very similar to ours and what those gu...

let me know if and when you want someone with a maxima to test it out.

Do you want the board tested in the 89 to 9? eprom ecu maxima's? They use the 6303 processor with a 28pin eprom.

The z31 .adr file is setup for 420cc injectors. This will have to be changed for new users or there will be problems. Perhaps the maf and injector size needs to be in the name. Or a window popup reminding the party using the software to make sure the .adr file has the correct size injectors before c...

Matt:
I've got two 90 Skyline GTS T type m that want tuning. Do you have a solution for the rb20det? (The other skyline is a rb26dett) And where would I find a consult connector? Are you carrying them seeing as it looks like they'll be needed for some of the ecu's?

Are you going to bring in the techedge digital wideband signal only or is it possible to use the other inputs coming in from the wideband and log them in Nistune? For instance I have a boost sensor setup for datalogging on the TE. It would be handy to have the boost pressure in the logfile when repl...

Where do I find the standard consult cable? Are you willing to supply the software to try or does he need to buy it? I would be the only one using it as he's deathly allergic to pc's.

I've got a buddy with a 90 GTR that I'll be tuning in May. Do you have anything ready for this ecu? Can I move my board to his ecu or do we need a new board?

When are boards going to be available for the 16 bit ka ecu's? I have 3 ecu's to finish tuning and don't wish to go thru the eprom burning/erasing thing.

EDIT: I guess I'm sol anyway unless I use the ram with board, but at least I could maptrace.

Are they all spoken for? I can think of a z31 guy and a couple of L28ET/z31 ecu guys that would grab one if possible.