Nistune Forums

Thanks again. Good info

Thanks for the info. Are those the only 2 things that are different? If you use a boost controller will it still matter?

I have a 1990 Z32 5 speed non turbo ecu with Nistune and Feature Pack card installed. Will it work in a 1994 Z32 5 speed Twin Turbo?

thanks for the info.

Is Nistune available for the B15 2002 Sentra with the qg18de engine?

I already have the flex board and the feature pack installed.
I'm having a brain fart today so do I need to send my ecu with flex board to get reprogrammed or just installing the updated software into my laptop will do the trick?

Thanks

Attached are Feature pack updates for Type 2 boards Covering models: BNR32, HCR32, Z32 (includes RB25 using R32 ECU) - Add crank enrich table (vs ethanol content) - Add invert flex tickbox [Bit 5] For tuning existing E85 tunes with fuel and timing reduction when on 98 octane - Add knock count repor...

Version 1.2.41 Add new mouse control icon controls using keypad Add flex crank enrich table and negate flex maps (fuel and timing) support for Z32, BNR32 and R32 Add TPS VE tracing for Y33 Cedric Add support for Z32 16 bit flex fuel and launch control reporting Can you please explain what changes in...

I went with this one: http://www.auberins.com/index.php?main_page=product_info&cPath=5_23&products_id=122 the mpx4250 reads up to 36 psi absolute (PSIA) which is about 21 psi on the gauge (PSIG) The one I bought reads up to 43.5 absolute PSIA which is about 28 PSIG Info here about absolute p...

kgriffin wrote:Ok I found the FTS/FTL graphs and they are at 0% during the surging idle.

Good work. So what did you do to get it running better from the surging idle and the FTS/FTL not reading properly?

Does the motorola MPX4250 also measure vacuum or only boost? How much do you sell the DLP a/d converter and motorola MPX4250 for? I didn't see it on the website? I see that the MPX4250 is only good for 21 psi of boost. Will this be better for 25-28 psi of boost? http://www.digikey.com/product-detail...

This is our Sesame Street guide! http://www.nistune.com/docs/Workshop%20Tuning%20Notes.pdf It covers how to get started. I put it together for our last lot of workshop training. There are other training notes on our documents page (like these power point slides) which go over the basics Is it a lit...

I'm still a little confused about exactly what I will need to buy to be able to log air fuel ratio and boost. I already have an AEM wideband. -what boost sensor is best that can read up to 25 or maybe 30 psi? (Is the Motorola MPX2450 the best for the money?) -USB to serial cable or can a single DLP ...

I have a Z31 1988 300ZX but I'm gonna use a Z32 ecu with type 2 board. So the inverted flex fuel map is ready for the Z32 ecu with type 2 board?

Thanks for the info. Makes sense. I'm still a few weeks from finishing my set up -1988 300ZX Shiro VG30ET single turbo -Precision Turbo Billet 6262 -Z32 ECU w/Nistune type 2 board with Flex Fuel setup -ID 1000cc injectors -HPX N1 MAF -etc previously made 520 whp at 20psi on E85 with a Microtech ECU....