Nistune Forums

Sorry for dum qs lol so with tipe on board vl turbo it is possable to run high impedence injectors? Also I read some where that low impedence where better some think about they are stronger to open if you have your fuel pressure cranked up I looking to buy some 800cc to 1000cc very soon just don't w...

hi all sorry for all the newbie stuff had not had much of a look at it all at the time and was about 3 steeps ahead of my self lol since walking away from it all for a a little bit I have found that I have a pipe missing from my cold start so I am going to block off as I want to remove all this on n...

see if this works was one we done the othere night

set the idle ICM solenoid bleed to warm idle of 750-800. is this the par that would be under my xf tb as that is concted but airline is not was running 3psi but was running at 9.4 afr on boost and 13 to 14.5 at idel so we have set boost to around 6 atm with the intake does that mean the rajab nizpro...

using this bin straght from rom pack

its a na block that has had a shim installed to de comp running to4e high mount turbo 2.5in pipe to fmic 3in out 300x600x100mm fmic xf tb coustom intake. afm inline in cooler piping running na injectors tial 44mm waste gate 3in zorst http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/554636_101...

hi guys new to this just turboed my vl and getting it running right so it safe to drive i have so far got it to idle good and have good afr's but it is very rich on boost but am running very low boost so will wind boost tomorrow and see how we go main problem is when idleing if u stab the throttle r...