Nistune Forums

Is there a base .bin file for a completly standard R33 GTST, stock intercooler stock injectors and stock AFM?

all the ones i see seem to still have the Z32 afm settings and are suited more to the modified skylines, any stock tuned working bins around?

Yeah you can see where the glue attatchs the chip to the board when you take the chip out. Glad i am not the only one who had this issue... sad to say this ECU is pretty much a write off. not usable at all and not repairable. cutting the chip made things much easier, but the one i did the chip was s...

what was the total cost of the units imported and modified?

Sounds like the loom has been butchered (or the white plug from the engine loom to the instrument loom is disconnected, or missing wires or something) Good to see you found the pinouts in the diagnostics document :) Yeah its amazing when someone actually looks and RTFM (Read the f&cking manual)...

thanks for the advice. had just to tool to cut the legs.... managed to get it off without peeling off the tracks this time... here is a pic, not bad for a second timer with no tools except for a soilder gun, a clicker sucker and some solder wick (damn that shit works great!) had a look on ebay, been...

i think the whole problem is that the body of the chip is stuck to the board. i need to get some paint thinners from somewhere..... No good ones. But one way is to first snip all the legs off the chip from the top side - you'll need a fine side cutters with a nice pointy end. Once they're all snippe...

any ways around doing it without a de-soilder gun? resources are a bit limited here...

hey matt.

thanks for the info... i tried to soilder them but the ecu still does not respond.. to consult or will not start the engine....

might have to write this ecu off i think... or maybe try again.

is it a bad idea to clean it and use contact spray?

I removed a eprom from an ecu, all the soiler was sucked out and the chip came out without too much problmems but i noticed Nissan uses glue under the chip and and there are tracks that run to the holes where the eprom connects to. Basically what has happened is that the glue lifted the tracks for 4...

found the details in the consult troubleshooting guide - installed extra plug and connected fine.

does this happen often?

its a Z32 ecu going into a R33 Skyline

Consult does not work with standard r33 ecu or with the Z32 ecu.

Any common issues / wire faults i should look our for to make fixing this issue easier?

cheers

Have a R33 i am trying to connect with Nistune but cannot go online with consult. I have installed the ECU into my own car and connected fine with my consult port without any problems. Thinking there is a cable link problem between ecu harness and consult port in car. Is there a pin out on how to wi...

is there any updates on this topic? I need to tune a R32 GTR with nistune and want to be able to control the boost with the standard solinoid.

i cannot find any maps in the standard address file to change it?

can anyone help?