Nistune Forums

Are you allowed to use E85? It brings it's own oxygen

I have one of these sensors/gauges ordered I plan on running it to the DLP-I08 also. http://my350z.com/forum/product-announcements/557573-e85-flex-fuel-content-gauge-with-0-5v-from-dynosty.html I only* use fuel from United, Pooraka pump #14. *Once I had to drive to Seaton because they were out (Mall...

Thanks anyway

RomChip200 wrote:sometimes I feel NT sluggish though.
consult connects in 1 second, then I press F5 and it takes more than 5 seconds to have LC1s connected
you get the feeling NT hangs up, a bit disapointing

Everything is immediate with the AEM UGEO. I don't think it's NT's fault.

I also use their 35 PSI Boost Gauge (30-4406) on AUX1 http://www.aemelectronics.com/images/30-4406_W_SB.jpg The sensor that was bundled with my gauge is the 3.5 BAR/50 PSIa Brass Sensor (30-2131-50) http://www.aemelectronics.com/images/30-2131-XX.jpg Positive is PSI, Negative is InHg (Same as the ga...

Just thought I'd share some CSV files for anyone using the same AEM gauges as me (with the DLP of course).

The most popular would probably be the UGEO AFR

Petrol AFR: E85 AFR: Lambda:

Let me know if you want to use one of my servers for testing (http://www.nitro-it.com.au/)
I have colocation boxes in AU and USA.

I hope the existing posts can be ported over, there's a lot of value here!

Ever though of giving he forums a fresh coat of paint so it looks more like the website?
i.e:
https://www.phpbb.com/customise/db/styl ... ed_3/demo/
https://www.phpbb.com/customise/db/style/redsteel/demo/
https://www.phpbb.com/customise/db/style/dvgfx/demo/

I'd appreciate that. Cheers

yeah a File>"Export as .nt file"
and just zip the csv and bin as "name.nt"
So anyone can bust 'em them if needed

OK.. instead of being cautious and triple checking everything. I decided to just wire the f'er and I think it's all good (Displays correct RPM, Blue light goes on after 1300RPM to tell me the window is active) Settings are currently: Low = 1300 (I may make this 2000 as suggested, once I go for a dri...

I went to install this on Sunday.. Very frustrating. what I believe to be Pin 59 has no volts (with the key in the start position, yes the battery is connected).

Can someone who has done this confirm my diagram please (or post a picture of how they hooked theirs up)?

On R33 the VTC cuts at 6100rpm and recovers at 5900rpm and when dose it kick in? just off idle right? I'm not sure I can set a recover value. I need to check the documentation. You should consider revising the FAQ (make it written for NFIers like me ;)): http://nistune.com/faq-general.php#general10...

Here's the RB25DET pinout: My window switch (seems different to yours) just came in the mail so I'll make a DIY
http://www.summitracing.com/parts/SUM-830452-1/ Still not 100% sure what the window should be set too.. anyone?

Just driving around the other night, Different laptop (Old one was a AMD 64 so it could have been a driver issue) and all inputs showing actual volts. AFR1 = AEM UEGO AUX1 (Boost) = AEM Boost Gauge AUX2 = Nothing AUX3 = Nothing AUX4 = Accelerometer Z AUX5 = Accelerometer X AUX6 = Accelerometer Y NIS...