Nistune Forums

ok will do, this cable used to work fine....i had some minor issues with previous releases picking the 1996 ODB2 file & then it would complain about USB drivers. but when selecting the 1995 adr file it would connect fine & i was able to tune. However with the last 2-3 new builds i have not b...

now i changed the com to 10, ecutalk connects to 10 fine, in nistune i have it set to auto, & tried com 3 like 3 times, & then com 10 once..... i then changed the com port to 10 & it tried connecting once, but didnt how should the port be setup in reg. to flow control & speed & s...

hey matt here is the log NISTUNE LOG Jul 25 2010 23:55 0.9.14.10b 21:53:32.206 CNistuneDoc - usb disconnected 21:53:32.222 CImageSelPanelView 21:53:32.222 ConsultMain() 21:53:32.222 CConsultSM::CConsultSM 21:53:32.222 SetConsultMode(): From 14 to 0 21:53:32.222 CImageSelPanelView 21:53:32.222 CRomul...

File-Configuration-Debug logging Enable this and then restart, try the connect and let me know Also COM3 is normally the laptop imbuillt modem. What port is your consult cable reporting to device manager? no modem in the laptop, its been removed... Device manager shows com3, i can change it if you ...

i dont know what the issue is, but i cannot connect with either of the latest versions...no more errors about no USB drivers, but i have the port set to auto & my cable/serial to usb adapter is using com 3, i see nistune tries to connect to it, but never does. I have no problem loading ecu talk ...

so is there a new version to DL? im still getting the error

you do know i have a type 4 board right?

hey matt i DL'ed the latest ROM & BEta (unistalled the old roms before installing the news) HOwerver i now have the problem with it saying wrong USB drivers like i was having before, but this time it does it no matter what .adr i use...... so right now i cannot use nistune....i think ima install...

as soon as it launches it complains about USB drivers....i dont use a usb cable, i use a serial one...... MAtt are you hard coding the app now to look for a USB consult cable? if so, how can i chnage it to only use the com port/serial cable? FYI i havent connected to my car yet, i just DL'ed here @ ...

ok first off....please dont say that the 555 are yellow,. i know that, but there ARE pink 555 Nismo's also, they were produced a long time ago & the yellows replaced them I recently purchased 4 of the pink 555 side feeds, & sent them off to be reconditiond, well 1 of the injectors is complet...

is this something i should hve requested or something that would have already been loaded when AutoVauhn did my ecu (about 1-2 months ago) this feature (launch control) & the ability to mask my flywheel CEL (show up as lack of cog, or misfire, due to running a FW with a different tooth count, it...

so with this....will launch control work with my typ3 4 RT board?

ok no problem.. so in the event of a NEW FW for my ecu (say a FW with launch control, & MAYBE the possibility to MASK/Delete MIL codes from the ECU (only code i want to do this to is the code for running the 109tooth fw in my car...) in 1994, the G20 was equipped with the Crank position sensor. ...

im using a 1996 g20 tho....the ecu i sent the guys at autovaughn was a 1996 g20- ecu. are you saying that the board i have installed isnt yet fully finished? will i have to send it back? i was told that the type 4's were all done, thus the reason i bought it, if i would have known there was going to...

ok kool, just let me know....


also im thinking it just maay be some code in the adr file, since it changes to look for the usb drivers....

i also noticed that there is no bin file for a MT for the 1996 g20....how can i dump my bin from my ecu & have nistune use that?