Nistune Forums

I'm just doing my homework at the moment, if i have new information i'll update this thread.

Bye
Terminar

There are boost maps etc to control the solenoid on later model SR20s, with earlier ones just having an emergency overboost solenoid I know the difference to the S14A here in germany, we tried to compare it here with different cars. As you said, the S14a model doesn't have the boost sensor anymore,...

Hi, this is not a general nistune question, but i don't know who i can ask for that technical question, because it happens in the ecu.... Currently, we are trying to investigate where the values from the boost sensor assembled in the S14 are used in the ecu. We are using nistune, too. A friend doesn...

Hey Matt, today i did wire-cutting on my wire loom directly on the ecu connector and soldered a new consult connector directly to my ecu connector (cutting RX, TX and CLK from the original CONSULT connector), maybe 5cm distance... I took GND from the screw below the ecu and 12V directly from my batt...

Ah, ok!

Thanks for the explanation, i didn't know the difference of the streaming mode. I'll try to check my grounding within the next days first and give feedback if it worked.

Bye
Terminar

Hi, i was trying to use the nistune software due to some problems with my car, i wanted to do some data logging (the nistune board isn't soldered yet, i first wanted to fix my problems). When the car is running, there are really fast nistune disconnects within 10-20 seconds. I read in the forum and ...