Nistune Forums

Ok I assumed the default of 0-5000 was for the DLP Io8 that is a 10 bit A-D thanks Matt

10 bit analog input max value 1024 /2 *10 =5120 how does this scale to 0-5000 for the volts

hi Matt I have the Arduino mega with a 2x16 display. uart1 is connected to 2 daisy chained lc1s (r32gtr) uart 0 is connected to nistune. I am scaling AFRs in arduino to match default AFR1 scaling in nistune the raw zero displays 8 in nistune raw 1024 displays 32 in nistune afr of 14.64 in arduino sc...

I had the same issue with one of my LC1 controllers [twin setup on rb26 with nb sim connected to ecu x2] A word of warning. I bricked the LC1 because I allowed the car battery voltage to drop too low during the firmware update. After this there were no led codes at all and no response from the mts s...

Okay the blusult is not seen by my Android phone (even though my hands free is fine) Says you need to get this (and going to use with my PLMS serial cable) http://gridconnect.com/serial-to-bluetooth.html So need the male (DTE version) which is self powered. However $71 + $44 shipping to Australia.....