Nistune Forums

ok, thank you

You’re the man Matt, appreciate it
I can’t seem to find the rev limit count.

What’s up everyone, I’ve been playing around with the launch control and got a couple question to get some more boost. I had limit at 3500, retard at 3300, and retard at 0, this got me 1psi.The cycle on the limiter is very slow, about a 1000rpm drop between each cycle. I raised the limit to 4000 and...

Ok cool, appreciate it.

what's up everyone, the other day I went to Datalog just for fun. when I got back noticed the MAF translation flashed red at 4500rpm wot 5.10v MAF. I assume that means I'm exceeding the MAF limit, but when I open the MAF translation I see 5.10v or 5100mv is only 35.5% and 100% is 6620mv. This got me...

ok cool, I Appreciate it Matt

What's up everyone, After doing some WOT pulls, I was watching some of my logs and noticed my injection time shoots up to about 9 ms when the turbo is beginning to spool, and drops down to about 5 ms when it's in boost. Same with the duty cycle, 50% when spooling but 29% when it's in boost. I’m not ...

Sounds good, thanks

I just finished up a NA2T on my car and trying to get it dialed in. It's on turbo injectors and t3/t4 on 8 psi, when I get into boost it reaches a load of 136 and gives me the "caution: ecu load(ttp) max reached. Injection Limited. Increase table values.". Just to confirm, to get the load ...

Yep, that seemed to fix the problem, thank you.

I’ll definitely try that out, I’m planning to na2t soon so I might grab the turbo injectors now. I appreciate you helping me out man

I tried out the tune you sent me and it still seems to have a stutter at about 3100 rpms, it goes away when I plug back in the nonnistune factory ecu. ill be wot and it pulls smooth but around 3100 it gets like a jolt.

this is the log and the bin

I got all the timing and copied it onto the feature pack map. i got my k constant at 607, my multiplier at 796, and my latency at 750. I got these numbers from the resize injectors. The na bin has the k constant at 850 and latency at 560. when I start the car on the Na bin k constant and latency it ...

Hey Matt, I got one last question for you. I got a 1987 na z31 ecu with a 88 to 89 fp1 nistune board. I'm still na and am trying to load a na base tune map but it doesn't allow me to import standard ecu files into feature pack. What do i need to do?